Solutions for Tel-Air-2 units
- Shelter cooling
- Small Data Centers
- Modular Data Centers
- Direct Free Cooling
- Equipment rooms
- For use in telecommunications, infrastructure, facilities, broadcasting
Benefits
- Innovative technology and high-quality components for low energy consumption
- Suitable for residential areas due to low noise emissions
- Plug and play and therefore immediately ready for connection and use
- Indoor installation keeps units protected against environmental influences and vandalism
Technical Data
- Cooling capacity total (kW) 4 - 13
- Airflow volume (m3/h) 1,000 - 3,200
- Sizes 6
Features
- Factory tested, filled with refrigerant and ready for operation from the very first day
- Downflow, upflow and displacement principle
- Condensation pressure control
- Outside air conditions: –20/+50 °C winter/summer
- Automatic restart after power failure
- Refrigerant R407C
- Filter monitor and airflow alarm
- Inside and outside temperature sensors
- G4 zigzag filter
Control and monitoring
The C2020 consists of a controller and an optional operator terminal. The controller controls all the functions of the Tel-Air-2 unit. The operator terminal, consisting of a keypad and LCD, displays the most important operating states and alerts.
Sequencing
- • The C2020 enables up to ten units to be configured in a single air conditioning system. If an individual unit drops out or the heat load rises, the standby unit is switched in for additional support
Night mode
- Time-controlled limitation of the condenser and evaporator fan speed for quiet operation
- Energy-saving mode
Monitoring and alarm relaying
- Via BMS systems
- Nine potential free contacts are available: Alarms can be assigned a high or low priority
- Via GSM modem
Simple configuration and software updates
- Central configuration of units from a laptop
- Hardware key for uploading and downloading software without a laptop
WIB 1000
WIB 1000 is user-friendly and offers easy data exchange, monitoring and worldwide suitability.
- Ongoing retrieval of data from the controller
- Ethernet interface
- Compatible with all common BMS systems
- Communication via SNMP and HTTP IP protocols
We are on the map